Samsung WA45T3400A Series Service Manual page 18

Part
Clutch
(continued)
16 _ Disassembly and Reassembly
Figure Description
5. Remove the bolt holding the pulsator with a
10mm wrench according to the direction of
arrow
6. Remove the shaft with the jig wrench.
- Release the nut in a clockwise direction.
- F asten the nut in a counterclockwise
direction.
7. Place the main body so that the front
frame faces upward and remove the 2 bolts
holding the saddle with a 10mm wrench.
When you place the washer on the floor,
take care that you do not damage or
scratch the product.
8. Remove the belt.
When you replace belt, check belt
tension certainly.
9. Remove the NUT with a 17mm wrench and
remove ASSY PULLEY MOTOR.