Related Manuals for Samsung WA44A34 A Series
Summary of Contents for Samsung WA44A34 A Series
- Page 1 Washer User manual WA45T3400**, WA44A34**A* WA3400T_DC68-03850E-04_EN.indd 1 WA3400T_DC68-03850E-04_EN.indd 1 2021-01-29 2021-01-29 12:41:21 12:41:21...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Installation Unpacking your washer Overview of your washer Basic location requirements Step-by-step installation Operating instructions Loading your washer Getting started Washing a load of laundry Control panel... - Page 3 Specifications Fabric care chart Helping the environment Declaration of conformity Specification sheet Cycle chart English 3 WA3400T_DC68-03850E-04_EN.indd 3 WA3400T_DC68-03850E-04_EN.indd 3 2021-01-29 2021-01-29 12:42:10 12:42:10...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. -
Page 5: California Proposition 65 Warning
These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. - Page 6 Safety information 9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode. 10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
- Page 7 This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. • Improper grounding may result in electric shock, fire, an explosion, or problems with the product. • Never plug the power cord into a socket that is not grounded correctly. Make sure the socket you use is grounded in accordance with local and national codes.
- Page 8 Safety information Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm. • Failing to do so may result in electric shock or fire. Critical usage warnings WARNING If the appliance is flooded, cut the power immediately and contact your nearest service center.
- Page 9 Do not turn the appliance off by unplugging the power plug while the washer is in operation. • Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire. Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.
- Page 10 Safety information Usage cautions CAUTION If the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp, soft cloth. • Failing to do so may result in discoloration, deformation, damage or rust. The clear portion of the lid can be broken by a strong impact.
- Page 11 Do not operate the appliance with wet hands. • This may result in electric shock. Do not spray volatile material such as insecticide onto the surface of the appliance. • As well as being harmful to humans, it may also result in electric shock, fire, or problems with the product.
- Page 12 Safety information Do not use hot water from water cooling/heating devices. • This may result in problems with the washer. Do not use natural hand-washing soap in the washer. • If it hardens and accumulates inside the washer, it may cause problems with the product, discoloration, rust, or bad odors.
-
Page 13: Installation
Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit. -
Page 14: Overview Of Your Washer
Overview of your washer Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 01 Drain hose 02 Hose guide... - Page 15 Adjustable Plier Measuring tape NOTE • If you lose an accessory and want to purchase a replacement, contact the Samsung service center (1-800-SAMSUNG (1-800-726-7864)). • The design of the parts and accessories may differ from the pictures above. Their design is subject to change without notice for product improvement.
-
Page 16: Basic Location Requirements
Installation Basic location requirements Electrical WARNING • 120 Volt 60 Hz 15 AMP fuse or circuit An improperly connected equipment- breaker. grounding conductor can increase the risk • Individual branch circuit serving only of electrical shock. Check with a qualified your Washer is recommended. - Page 17 The water faucets must be within 4 feet Never install your washer on a platform or (122 cm) to the back of your Washer to weakly supported structure. match the inlet hoses provided with your Location considerations Washer. Do not install your washer in areas where NOTE water may freeze, since your washer will Accessory inlet hoses are available in...
- Page 18 Installation Recessed area Side view - closet or confined area 1 in (2.5 cm) 21 in (53.3 cm) 27.0 in (68.6 cm) 1 in (2.5 cm) 29 7/16 in (74.4 cm) 5.9 in (15.0 cm) Gap between end of water valve and the wall •...
- Page 19 Required dimensions for Installation 59.4 in (151.0 cm) 27.0 in (68.6 cm) 40.2 in (102.2 cm) 43.9 in (111.7 cm) 48.0 in (310.0 cm 24.0 in (155.0 cm 3.0 in (7.6 cm) 29.3 in (74.4 cm) NOTE 43.9 in (111.7 cm) * Required spacing English 19 WA3400T_DC68-03850E-04_EN.indd 19...
-
Page 20: Step-By-Step Installation
Installation Step-by-step installation STEP 1 Selecting a location NOTE Before you install the washer, make sure the location: • Has a hard, level surface without carpeting or flooring that may obstruct ventilation. • Is away from direct sunlight. • Has adequate ventilation. •... - Page 21 1. Connect the ends of the water supply hoses to the hot and cold faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. CAUTION When you fasten the fittings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes.
- Page 22 Installation 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake.
- Page 23 STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: In a Wall standpipe or Floor standpipe The height of end of standpipe must be no lower than 39 in (99 cm) and no higher than 96 in (245 cm).
- Page 24 Installation NOTE Connect the hose guide (A) within 3~5 in (7.6~12.7 cm)* from the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the washer. NOTE The drain hose can be installed to a 96 in (245 cm) maximum, but the draining...
- Page 25 STEP 4 Leveling your washer See if the washer is level by checking the position of the tub: 1. Slide the washer into position. 2. Open the lid of the washer, and pour the water into the tub to just below the pulsator level.
- Page 26 Installation STEP 5 Powering your washer Plug the power cord into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded electrical outlet.
- Page 27 STEP 6 Running a test cycle Run a test cycle as follows to check if your washer is properly installed. 1. Load about 6 pounds of laundry into the tub. 2. Press POWER to turn on your washer. 3. Select Rinse+Spin by turning the Cycle Selector. 4.
-
Page 28: Operating Instructions
Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer WA45T3400** • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load. -
Page 29: Getting Started
To input a blanket (WA45T3400** models only) Fold the blanket into the blanket-specific net as shown, and then insert in the tub below the plastic area of the tub. CAUTION Make sure the laundry is inserted completely. • Any exposed part of the laundry may cause damage to the machine or the laundry itself, or a water leak. -
Page 30: Washing A Load Of Laundry
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel Turn the Cycle Selector to select the desired cycle. The indicator by 01 Cycle Selector the cycle name lights up. - Page 31 Press the button to select the soil level/washing time. • Heavy - For heavily soiled loads. 05 Soil • Normal - For moderately soiled loads. This setting is best for most loads. • Light - For lightly soiled loads. Delay the end of any cycle for up to 24 hours in one-hour increments. 06 Delay End Displayed hour indicates the time the wash will be ended.
-
Page 32: Cycle Overview
Washing a load of laundry Cycle overview NOTE The washer detects the weight of the items and automatically adjusts the optimal water level, washing time, rinse counts, and spin counts. (This may not be applicable on some cycles.) Cycle Description •... - Page 33 Cycle Description • For loads that needs spinning only. SPIN ONLY • You can also select this cycle for additional spinning after running other cycles. • Use to clean dirt and build-up from the tub. SELF CLEAN • Perform once every 20 washes. •...
-
Page 34: Options
Washing a load of laundry Options Child Lock • After the compulsory drain, the “CL” blinks at 1 second intervals and the Child Lock prevents children from playing product enters the “CL” mode. (When with your washer. the product is in the “CL” mode, only the Activating the Child Lock function POWER button works.) Press and hold Temp. - Page 35 Deactivating the Child Lock function Alarm Off Press and hold both Temp. and Water Level You can turn the alarm sound on or off. simultaneously for approximately 3 seconds. When the alarm is off, the cycle completion • When you deactivate the Child Lock melody and the power-off beep will not function, the Child Lock indicator is...
- Page 36 4. To cancel a Delay End function, press the procedure and displays an information POWER button and then turn the washer code if a problem is detected. 3. Run the Samsung Laundry app on your on again. mobile device, and then tap Smart Care. Pre Soak 4.
-
Page 37: Washing Clothes Using The Cycle Selector
Washing clothes using the cycle selector Pause Option Your new washer makes washing clothes easy, using Samsung’s “Fuzzy Control” To remove or add laundry items, follow automatic control system. When you select these steps: a wash program, the machine will set the 1. -
Page 38: Atc (Auto Temperature Control)
Washing a load of laundry ATC (Auto Temperature Control) ATC is the control function that the NOTE washer controls water temperature with If customers want to wash clothes in specific temperature sensor (thermistor). water temperatures, customers should choose a different cycle at each temperature NOTE (Hot/Warm/Eco Warm). -
Page 39: Special Features
Special features Active Waterjet (for prewash) You can use the Active Waterjet function to hand-wash your items before you put them in the washer. 1. Press POWER to turn on your washer. 2. Open the lid. 3. Press Active Waterjet to supply water. 4. -
Page 40: Detergent Use
Washing a load of laundry • Due to differences in air pressure, water coming from the Active Waterjet may splatter when you first activate it. • Make sure the lid is closed tightly before you start a load of laundry. Detergent use For the best cleaning results, use a high efficiency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. -
Page 41: Features
Features Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser must always be in place before you start your washer. DO NOT open the automatic dispenser when your washer is running. - Page 42 Washing a load of laundry Loading the Liquid (or Powder) detergent compartment 1. Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment.
- Page 43 Loading the Bleach compartment CAUTION Use the liquid chlorine bleach only. 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the bleach compartment. NOTE • Avoid splashing or over–filling the compartment. • Never pour undiluted liquid chlorine bleach directly onto the load or into the tub.
- Page 44 Washing a load of laundry Loading the fabric softener compartment 1. Pour the recommended amount of liquid fabric softener into the softener compartment (C). For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment.
-
Page 45: Maintaining Your Washer
Maintaining your washer WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve, heater and pump. Cleaning the exterior 1. -
Page 46: Preserving The Top Cover And The Front Frame
Maintaining your washer Preserving the top cover and the front frame Do not place any heavy or sharp objects or NOTE a detergent box on the washer. They can Since the entire washer has a high-gloss scratch or damage the top cover of the unit. finish, the surface can be scratched or damaged. - Page 47 2. While pushing both sides of the dispenser drawer, lift and pull it to remove. 3. Remove the inserts from the 3 compartments. Rinse the inserts and the drawer with warm water to remove traces of accumulated laundry products. 4. To clean the drawer opening, use a small, non-metal brush to clean the recess.
-
Page 48: Self Clean
Maintaining your washer Self Clean Certain usage and environmental conditions may result in some residue build-up or odor in the washer tub. To prevent this build-up or odor and keep your washer tub fresh and clean, perform the Self Clean cycle at least once a month or every 20 cycles. Perform the recommended procedure below when using the Self Clean cycle. -
Page 49: Troubleshooting
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Action • Make sure you use rated power for the product. Does not turn on. • Make sure the power cord is completely plugged in. •... - Page 50 Troubleshooting Problem Action • Make sure the washing machine is set on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. • Make sure the washing machine is not contacting any other object.
- Page 51 Problem Action • Fully open both water taps. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct water taps. Flush water lines. • Disconnect the hoses and clean the screens. The hose filter screens may be clogged.
- Page 52 Troubleshooting Problem Action • Make sure all hose connections are tight. • Make sure the water supply hose's rubber packing is in the correct position. Screw tightly again. • Make sure the end of the drain hose is correctly inserted and secured to the drain system.
-
Page 53: Information Codes
Run cleansing cycles to sanitize periodically. • Dry the washing machine interior after a cycle has finished. If a problem persists, contact a local Samsung service center. Information codes The washer may display information codes to help you understand what is occurring with your washer better. - Page 54 Troubleshooting Code Meaning Water is not supplied. • Make sure the water taps are open. • Make sure the water hoses are not clogged. • Make sure the water taps are not frozen. • Make sure the washing machine is operating with sufficient water pressure.
- Page 55 Water is overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre. When position of the clutch can't be detected. • If the information code remains, contact a customer service centre.
- Page 56 Additional rinsing. • Show additional rinsing in sensing unbalance. • Method of releasing the display. Any key input. For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG). 56 English WA3400T_DC68-03850E-04_EN.indd 56 WA3400T_DC68-03850E-04_EN.indd 56 2021-01-29 2021-01-29 12:42:51...
-
Page 57: Specifications
Specifications Fabric care chart The following symbols provide garment care The clothes washer can not ensure direction. The clothing care labels include these temperatures because the actual symbols for drying, bleaching, drying and temperature of the water entering your ironing, or dry cleaning when necessary. The washer depends on water heater settings use of symbols ensures consistency among and regional water supply temperatures. - Page 58 Specifications Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry...
-
Page 59: Helping The Environment
Helping the environment • Your washer is manufactured from • Do not exceed the detergent quantities recyclable materials. If you decide to recommended in the detergent dispose of it, please observe local waste manufacturers’ instructions. disposal regulations. Cut off the power •... -
Page 60: Specification Sheet
Specifications Specification sheet Type Top loading washer Model name WA45T3400**, WA44A34**A* A. Height 43.9 (111.7) B. Width 27.0 (68.6) Dimensions (inches (cm)) C. Height with lid open 59.4 (151.0) D. Depth 29.3 (74.4) Water pressure (psi (kPa)) 20 - 116 (137 - 800) NET weight (kg (lb)) 61.0 (134.5) Spin revolution... -
Page 61: Cycle Chart
Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Temp. Water Level Soil : factory setting H: Hot EH: Extra High H: Heavy : can be selected W: Warm H: High N: Normal EW: Eco Warm M: Mid L: Light... - Page 62 If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
- Page 63 Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues. EXCLUSION OF IMPLIED WARRANTIES...
- Page 64 REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
- Page 65 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 66 BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- Page 67 (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 67 WA3400T_DC68-03850E-04_EN.indd 67 WA3400T_DC68-03850E-04_EN.indd 67 2021-01-29...
- Page 68 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca_fr/support (French) DC68-03850E-03 WA3400T_DC68-03850E-04_EN.indd 68 WA3400T_DC68-03850E-04_EN.indd 68 2021-01-29 2021-01-29 12:43:01 12:43:01...