Part
Thermistor
Clutch
(continued)
Figure
Description
1. Remove the 2 screws.
1. Separate the top cover assembly by lifting
and pushing ahead the top part of the
assembly.
2. Remove the 2 screws holding the panel
control Separate all the wires connected to
the housing.
3. Remove the 9 screws fixing the tub-cover
and separate the tub-cover.
4. Separate the pulsator-cap by inserting
the tip of a (-) screwdriver between the
pulsator-cap and the pulsator.
Disassembly and Reassembly _ 15