Part
Sub and Main PCB
Water Valve
Figure
Description
6. Pull and lift up the cover PCB(m).
7. Separate the cover PCB(m) and the wires
connected to the main PBA.
After reassembling the housing, check if
the wires are properly connected. When
disassembling and reassembling the
housing, take care that you do not damage
the part.
8. Pull the PCB (s).
9. Separate 5 hooks with – driver.
1. After separating the control panel, separate the
water-valve housing.
2. Remove the 3 fixing screws.
Disassembly and Reassembly _ 11