Change Settings; Access The Setup Menu; Change Video Settings; Change Audio Settings - Philips HTS5580W User Manual

6

Change settings

This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already conÀ gured
with the best value for the home theater.
Unless you have a speciÀ c reason to change a
setting, it is best to leave it at the default value.

Access the setup menu

1
Press ( Home ).
2
Select [Setup] , then press OK .
» The setup menu appears.
3
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
4
Press BACK to return to the previous
menu, or press to exit.
Note
•
You cannot change a setting that is grayed out.

Change video settings

1
Press ( Home ).
2
Select [Setup] , then press OK .
3
Select [Video] , then press OK .
4
Select and adjust the following settings:
• [TV Display] : Selects a picture display
format to À t the TV screen.
•
[HDMI Video] : Selects the HDMI
video resolution.
•
[HDMI Deep Color] : Displays colors
with more shades and hues when
the video content is recorded in
Deep Color and the TV supports this
feature.
•
[Component Video] : Selects the
component video resolution. Copy-
protected DVDs can display only
480p/576p or 480i/576i.
•
[Blu-ray 3D video] : Selects the
3-dimensional video output when you
play a 3D video on your home theater.
The home theater must be connected
to a 3D TV through HDMI.
•
[Picture Settings] : Selects a predeÀ ned
color setting.
5
Press OK to conÀ rm your choice.
Note
•
The best setting is automatically selected for
the TV. If you change the setting, ensure that
the TV supports the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For settings related to progressive or
component video, the TV must be connected
through Component Video.

Change audio settings

1
Press ( Home ).
2
Select [Setup] , then press OK .
3
Select [Audio] , then press OK .
4
Select and adjust the following settings:
•
[Night Mode] : Selects quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and
increases the volume of soft sounds
such as speech.
•
[HDMI Audio] : Selects HDMI audio
format or disables HDMI audio output
for the TV.
•
[Speaker Setup] : Sets the volume level
and distance of each speaker to obtain
the best possible surround sound
based on your room setup.
5
Press OK to conÀ rm your choice.
EN 21