Table of Contents
Advertisement
DISPLAY & FUNCTIONS
SETTINGS MENU
Press and hold the 'MODE' Button for 2 seconds to enter the Settings Menu.
The Settings Menu will allow you to change certain parameters of your ebike.
Once in the Settings menu the word mode display will begin to flash, pressing the
'Mode' button will allow you to cycle through the different settings. The 'PLUS'
and 'MINUS' buttons will allow you to change the values of those settings.
Holding the 'MODE' button again for 2 seconds will save
the settings and exit the Settings Menu.
10
RESET SPEED AND DISTANCE
Press 'PLUS' or 'MINUS' and toggle to 'y' to reset
average speed / max speed / trip / time.
SYSTEM
Press 'PLUS' or 'MINUS' to toggle between metric / imperial.
BRIGHTNESS
Press 'PLUS' to increase the display brightness or
'MINUS' to decrease the display brightness (1 - 5).
AUTO OFF
Press 'PLUS' or 'MINUS' to change the length of time
before the display powers off - to conserve energy. (Chose
from 1 to 15 minutes or '0' to disable this feature.)
WHEEL SIZE
Press 'PLUS' or 'MINUS' to change the wheel diameter.
MORE
(Password protected) functions within this section
are not programmed by the consumer.
To quit the parameter settings menu press and hold the
'MODE' button on the bottom of the display for 2 seconds.
w w w . i G O e l e c t r i c . c o m
Advertisement
Table of Contents
