Table of Contents
Advertisement
Warning! Please read and follow the safety instructions
carefully.
1. The shredder must be assembled correctly before use.
2. Warning! This appliance must be earthed!
3. Warning! Use only three-core extension cables with
the earth wire connected.
4. Only use extension cables that are approved for outdoor
use and check that they are in good condition before use.
5. Protect the cables from any damage by excessive
mechanical stress, sharp edges, contact with moving parts
and corrosive liquids, etc.
6. Warning! Do not use an extension cable that shows any
signs of damage. Fit a complete new cable - do not
undertake any permanent or temporary repairs. Have the
cable replaced by a qualified technician.
7. Before inserting the plug into the mains socket, make sure
that the socket ratings are correct and correspond to those
indicated on the rating label of the shredder.
8. Never move the shredder by pulling the cables.
9. Always disconnect the machine from the mains supply
before transporting it to other places.
10. Always switch off the shredder before disconnecting any
plug and socket connector or extension cables.
11. Explanation of the safety switch on the collection box: The
switch is in the "Lock is on" position: The collection box is
locked. The shredder can be switched on. The switch is in
the "Lock is off" position: The collection box is not locked
and can be removed. The shredder cannot be switched on.
12. Never leave the shredder unattended while it is switched
on.
Safety instructions
Advertisement
Table of Contents
