Replacing The Reader Knob - iLoq G50S User Manual

8. Replacing the reader knob

If the reader knob is damaged and needs replacement knob, please follow instructions how to replace the
reader knob correctly.
1. Loosen the screw on the reader knob. Use a T10 (torx) tool.
2. Remove the reader knob from the cyliner neck.
3. Slide the new reader knob onto the neck so that the screw hole is facing the same direction as the two
knob adjustment slots in the neck.
G50S Cam Lock Cylinder
G50S Cam Lock Cylinder
User Guide
Make sure that there is no gap
between the reader knob and the
body of the lock cylinder. If there is,
the weather protection sealings will
not function correctly.
10