Compatible Key Tubes; Replacing The Reader Knob - iLoq F50S.211.HZ Mounting And Care Instructions

5. COMPATIBLE KEY TUBES

The following key tubes should be compatible:
Product: Diameter:
F50S.2x1.HZ 45 mm
F50S.3x1.HZ 38 mm
F50S.4x1.HZ 65 mm
F50S.5x1.HZ 38 mm
Please check upfront if the key tube cylinders are still compatible, or if the key tube
manufacturer performed some changes.

6. REPLACING THE READER KNOB

The reader knob may need to be replaced if the length of the original knob is not suitable for the
installation environment or the knob is damaged. Follow the instructions below to replace the
knob:
1. Loosen the knob screw by using the TORX 10 tool
2. Pull the knob out from the neck
Key Tube:
AssaAbloy 390877-100-055
Kruse 530000, 530010, 530002
AssaAbloy KD209, KD210
AssaAbloy KD201, KD201X, KD205, KD207
iLOQ Oy • Oulu, Finland • www.iLOQ.com • iLOQ is registered trademark of iLOQ Oy •
©2018 iLOQ Oy. All Rights Reserved •