Table of Contents
Advertisement
Notes
Safety
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Mounting position and ambient temperature
The devices can be snapped onto standard rails or screwed onto a flat surface.
Plug-in screw terminals connect power and interfaces.
Ambient temperature -5...50 °C (23...122 °F)
●
Installation
No internal line protection for supply lines to external consumers
Risk of fire and injury due to short-circuits
●
The relay outputs may be connected to mains voltage
Risk of electric shock! Incorrect installation of the device may lead to electric shock injuries
when touching the device!
●
●
●
Disposal
Siemens Schweiz AG
Smart Infrastructure
Observe national provisions and comply with the appropriate safety regulations.
Wall, horizontal
– From left to right
– From right to left
Adapt the line diameters as per local regulations to the rated value of the installed fuse.
Install the device in a lockable cabinet or use terminal covers.
Do not install the device in locations where children are likely to be present.
Conductors with a cross-section of 0.5 mm2 (AWG24) or greater shall comply with the
requirements of IEC 60332-1-2 and IEC 60332-1-3 or IEC TS 60695-11-21.
This symbol or any other national label indicate that the product, its
packaging, and, where applicable, any batteries may not be disposed of as
domestic waste. Delete all personal data and dispose of the item(s) at
separate collection and recycling facilities in accordance with local and
national legislation.
For additional details, refer to
CAUTION
Ambient temperature -5...45 °C (23...113 °F)
●
Overhead
●
Wall, vertically
– From top to bottom
– From bottom to top
●
On a horizontal surface
WARNING
WARNING
Siemens information on
disposal.
7
A6V11646018_en--_k
2023-02-27
Advertisement
Table of Contents
