Advertisement
Handle
Basket
1
• "Snap" the handle into the basket.
Support B
2
• Fit the support marked with an
"A" into the slots in the base
marked "A".
• Press to "snap" the support
in place.
• Repeat this procedure to attach
support "B" to the base.
Assembly
Support A
B
A
Base
3
• Turn the base so the bottom is
facing you. Insert four screws into
the holes in the base and tighten.
• Turn the base upright again.
4
• "Snap" the basket assembly onto
the supports, as shown.
• Insert four screws into the holes
inside the basket and tighten.
One-time assembly is now
complete.
Advertisement
