Advertisement
WARNINGS:
Green blink on Warning lights (Arm-lock is
enabled, meaning the drone will not arm unless it
has GPS lock *this is the default configuration*)
Red blink on Warning lights (Battery is low
*3.5V is the default warning cell voltage*)
30
RubiQ
FIELD NOTES
Blue blink on Warning lights (Critical hardware
malfunction)
NOTE: The default warning cell voltage is set to 3.5V
to account for the dip that can occur when the drone
draws heavily on the battery during flight. When RubiQ
lands and you plug in the battery to recharge, you
should notice that the cells show a voltage higher than
3.5V. 3.7V or above is ideal for the overall life of your
LiPo's. Since the warning cell voltage is set for flight
conditions, use the RubiQ Configurator to keep an eye
on the voltage when working on the bench. Recharge
as soon as their cells hit 3.8V (11.4V total for Rubi's 3S
battery) to maximize their total life.
© 2021 PCS Edventures, Inc.
Advertisement
