Advertisement
D
x4
*One leg not
shown for clarity
2.
Place the Table Top Assembly (A1 or A2)
upside down on a non-marring surface. Turn
the leg assembly from the previous step and
push the tops of the four legs into the four
slots in the bottom of the table top. Make
sure the shoulder of the leg is firmly against
the table bottom. Fasten using (4) of
hardware b.
b
3
C
a
x4
Leg shoulder
Bottom surface
of table top
1.
Start with a leg (D) and the Middle
Support (C). Holding the leg in a
corresponding slot in the Middle support,
fasten the leg using (1) of hardware a. The
ledge of the leg should be against the
bottom of the Middle Support and the leg
should be pushed against the inside of of the
slot. Repeat for all four legs.
CI-1801 & CI-1804 Assembly
TOP VIEW
Advertisement
