Advertisement
BASIC FUNCTIONS
Playing tracks in random order
Selecting a disc on the CD changer
1 Press SHUFFLE on the remote control during playback.
y
• Press either CD 1, CD 2 or CD 3 to select a particular disc.
Selecting a track and searching
2 To return to normal playback, press SHUFFLE again.
Selecting a track during playback
• Rotate í JOG CONTROL ë (pressí or ë on the remote
control) to skip to the beginning of the previous or next track
CD text
on the selected disc.
Playback continues with the selected track.
y
Selecting a track when playback is stopped
1 Rotate í JOG CONTROL ë (pressí or ë on the
remote control) to skip to the required track number.
2 PressÉ PLAY/PAUSE (Éon the remote control) to start
playback.
y
Playback starts with the selected track.
Note: Instead of using í or ë on the remote control, you can
also directly key in the required track number by using the
numerical keys. For 2-digit numbers, press the keys in
rapid succession.
Searching for a passage during playback
1 Keep à SEARCH or á SEARCH (à or á on the remote
control) pressed to find a particular passage in a backward
or forward direction.
y
Searching is started and playback continues at a low
volume. After 3 seconds, the search speeds up with
volume muted.
2 Release the key at the desired passage.
Normal playback continues.
y
Note: During SHUFFLE , while repeating a track or while playing
a program, searching is only possible within the current
track.
SHUFFLE and REPEAT
Repeating a track, the disc or the program
1 Repeatedly press REPEAT on the remote control during
playback to select either:
y
: The current track is played repeatedly.
REPEAT TRACK
: The entire selected disc is played repeatedly.
y
REPEAT DISC
y
: All discs in the CD changer (or the program)
REPEAT ALL
are (is) played repeatedly.
2 Playback starts in the chosen mode.
3 To return to normal playback, press REPEAT on the remote
control until the display indication disappears.
Note:
is not possible during SHUFFLE or while
REPEAT DISC
playing a program.
14
is shown and either all tracks of the program or
SHUFFLE
of the loaded disc(s) in the CD changer or CD recorder
are played in random order.
Erasing a track from the program
1 If necessary, press Ç STOP on the unit (Ç on the remote
control) to stop playback.
2 Press either CD 1, CD 2, CD 3, or CDR to select the desired
MIC
LEVE L
memory.
3 Press PROG (PROGRAM on the remote control), followed by
à SEARCH or á SEARCH (à or á on the remote
MIC
control) to move through the program steps.
y
Programming track numbers
4 Press NO to remove the track from the program.
You can select tracks and store them either in the CD changer
y
or CD recorder memory. If you use the program for playback
y
you can choose one of the two memories, else if you like to
specify tracks for recording, use the CD changer memory only!
You can store any track more than once.
Clearing the program
1 Load the desired disc(s) in the disc tray(s).
1 If necessary, press Ç STOP on the unit (Ç on the remote
2 Press either CD 1, CD 2, CD 3, or CDR to select the disc.
control) to stop playback.
3 Press PROG on the unit (PROGRAM on the remote control).
2 Press NO.
starts blinking and Program is displayed.
y
PROG
y
4 If either CD 1, CD 2 or CD 3 is selected:
3 Press YES to clear the program.
Rotate í JOG CONTROL ë to select either:
y
CD1 (or 2, 3) All: All tracks of CD 1 (or 2, 3) will be
y
programmed.
Note: When you open the CD recorder tray or the CD changer
CD1 (or 2, 3) and track number: The track number of
y
CD 1 (or 2, 3) will be programmed.
Making a program for recording
If CDR is selected:
1 Select and store all desired tracks in the CD changer
Rotate í JOG CONTROL ë (press the numerical keys on
memory (see "Programming track numbers").
the remote control; for 2-digit numbers, press the keys in
rapid succession) to select a track number.
2 Enter the recording menu (see "Internal recording").
5 Press YES to store your selection in the memory.
• If the total time of the program is of larger size than the
The number of programmed tracks (
), Prog and the
y
STEP
remaining recording time of the CDR(W):
total program time are displayed. The track number
y
blinks in the music calendar.
If you nevertheless start recording, only those tracks of the
6 Select and store all desired tracks in this way.
program that fit onto the CDR(W) will be recorded in
entirety.
7 Press PROG on the unit (PROGRAM on the remote control)
to end programming.
•To change the program, press NO.
stays shown and the program is currently
y
PROG
y
available.
Note: If the maximum number of programmable tracks is
reached, the display shows Program full.
PROGRAM
The track number at the selected step and the total
program time are displayed.
Cleared is displayed briefly.
The next programmed track number will move up to this
position and is displayed together with the step number
and the remaining total program time.
Clear Prog? is displayed.
Prog Cleared will be displayed and
goes off.
PROG
tray the respective program will be cleared.
Not fitting! will be displayed briefly, followed by
the remaining recording time and Record Prog?
Edit Program will be displayed briefly,
and
PROG
the time of the program start blinking. Now you can
change the program (see "Programming track numbers",
"Erasing a track from the program" and "Clearing the
program").
15
Advertisement
