Advertisement
Read the following documents before using DJITM OSMOTM Mobile 6:
It is recommend to watch all tutorial videos on the official DJI website (www.dji.com/osmo-mobile-6/video) or in the DJI Mimo app. Read the safety guidelines and quick start guide before using for the first time. Refer to this user manual for more information.
Scan the QR code above to download the latest version of DJI Mimo app.
The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version of DJI Mimo is compatible with Android v8.0 and later.
Boasting 3-axis stabilization and a built-in extension rod, the lightweight Osmo Mobile 6 unlocks the full potential of your mobile phone. The foldable magnetic design makes setup easier than ever, transportation and storage more convenient, and it can power on automatically once unfolded. Osmo Mobile 6 can be operated in both portrait and landscape, while the upright, underslung, side grip, and low position modes help capture the perfect shot. Take content to the next level through DJI Mimo with ActiveTrackTM 5.0, DynamicZoom, and Pano. The Story mode, Timelapse, and ShotGuides provide step-by-step tutorials according to the scenario and help generate a video that can be shared on social media.
Osmo Mobile 6 is compatible with DJI OM Fill Light Phone Clamp and DJI Mic, which can be purchased in the DJI Store.
To charge Osmo Mobile 6, connect a USB adapter (not included) to the charging port using the power cable. The battery is fully charged when the battery level indicator turns off on the status panel.
Charging time: approx. 1 hour 24 minutes (tested in the environment temperature of 25°C when using a 10 W charger)
Max runtime: approx. 6 hours and 24 minutes (tested with the gimbal balanced and held steadily. This value should be taken as a reference only)
Magnetic Phone Clamp Tips
Make sure the direction of the magnet phone clamp is the same as shown in the figure above. For optimal performance, make sure the magnetic phone clamp is in the middle of the mobile phone, and the distance between the clamp arms is the same.
The anti-slip pads help to secure the mobile phone and the magnetic phone clamp. Attach the anti-slip pad to the magnetic phone clamp as shown in the figure below and press down firmly.
The status indicator on the status panel will pulse red if the magnets are not aligned.
Adjust the position of the magnetic clamp in that case.
Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.
System Status Indicator Descriptions
Blinking Pattern | Descriptions |
Pulses red | Magnetic is not aligned |
Solid yellow | Bluetooth disconnected |
Solid green | Bluetooth connected |
Pulses yellow or green | Standby mode |
Blinks red and green alternately | Firmware updating/firmware update failed |
Solid red | Abnormal status detected |
Battery Level Indicator Descriptions
Blinking Pattern | Battery Level |
Blinks red quickly | ≤5% |
Solid red | 6%-19% |
Solid yellow | 20%-60% |
Solid green | >60% |
Follow: pan and tilt axes follow, where both the pan and tilt axes follow the movement of the grip. Suitable for scenarios when moving up and down or on a slant.
Tilt Locked: only the pan axis follows, where only the pan axis follows the movement of the grip. Suitable for scenarios such as arc shots or moving from left to right.
FPV: pan, tilt, and roll axes follow, where all three axes follow the movement of the grip. Suitable for shooting the first-person view.
SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis rotation. SpinShot enables footage to be shot while rotating the camera 360°. This is suitable for shooting push, pull, and down.
M Button
When powered off
With the gimbal folded, press once or press and hold: check the battery level
With the gimbal unfolded, press once: power on
When powered on
Press once: switch between gimbal modes
Press three times: enter standby mode (press any button to exit) Press and hold: power off. Press and hold for 20 seconds to force power off
Side Wheel
Press once: switch between focus and zoom
Rotate: control focus or zoom
Joystick
Move vertically and horizontally to tilt and pan the mobile phone. The joystick control direction can be set in DJI Mimo. Use the joystick to navigate through settings on the Quick Settings page.
Shutter/Record Button
Press once: take a photo or start or stop recording.
Press and hold: for burst shooting when in photo mode.
Switch Button
Press once: switch between front and rear cameras.
Press twice: switch between landscape and portrait mode.
Press three times: switch between photo and record mode. The feature can be set to control Quick Settings in DJI Mimo.
Trigge
Press once to start or stop ActiveTrack 5.0 (requires used with Mimo).
Press twice to recenter the gimbal. When using ActiveTrack 5.0, the gimbal will recenter to the center of the camera view.
Press once, and then press and hold to adjust the follow speed to fast mode, release to exit.
Press and hold to enter lock mode. In lock mode, the gimbal will not follow the handle movements. Release to exit lock mode.
Charging Port (USB-C)
Charge Osmo Mobile 6 by connecting a USB adapter to this port.
1/4"-20 UNC Port
The 1/4"-20 UNC port can be used to attach a tripod.
M3×0.5 Screw Hole
Used to mount counterweights. Counterweights should be used if a camera lens or microphone is mounted on the mobile phone. Make sure the total weight of these accessories is less than 290 g.
Combination Operation
Press the switch button, shutter/record button, and trigger simultaneously for more than one second to reset the Bluetooth name and connection and reconnect.
Osmo Mobile 6 will be powered off automatically if there is no operation for three minutes in standby mode.
Operation modes apply when used in portrait and landscape mode.
Upright mode can be used without any further user input. In this mode, press the trigger twice quickly to center the mobile phone.
Rotate Osmo Mobile 6 to the right or left by 90° to go from Upright to Side Grip mode. Press the trigger twice to center the mobile phone.
Hold Osmo Mobile 6 upside down to enter Underslung mode, in which the mobile phone can easily capture images from a lower position. Press the trigger twice to center the mobile phone.
Extend the built-in extension rod and adjust the angle to Low Position mode. Use Low Position mode to shoot from a low angle.
Watch a live HD video feed on your mobile phone screen through the DJI Mimo app. The app also allows you to use ShotGuides, Story mode, Hyperlapse, Timelapse, ActiveTrack 5.0, DynamicZoom, and Pano, or configure camera and gimbal settings in just a few taps.
Device: tap to connect to Osmo Mobile 6. Once connected, DJI Mimo enters camera view.
Academy: tap to watch tutorials and view manuals. Scan the QR code on the gimbal to access Academy directly.
AI Editor: provides several templates to edit photos or videos.
Home: tap to return to the home screen.
Album: manage and view footage from the phone or DJI devices.
Editor: tap to edit photos or videos from Osmo Mobile 6 or import and edit from a mobile device.
Profile: register or log in to a DJI account. Tap the setting icon to access more settings.
When connected via Bluetooth, Osmo Mobile 6 is able to control the mobile phone camera without DJI Mimo. Refer to the Mobile Phone Compatibility List for details www. dji.com/osmo-mobile-6.
Use DJI Mimo to update the Osmo Mobile 6 firmware. It takes approximately three minutes to complete an update.
How to Update
Before starting an update, make sure that the battery level indicator shows green or yellow. Connect Osmo Mobile 6 to your mobile device and launch DJI Mimo. You will be prompted if a new firmware update is available. To start updating, connect the mobile device to the internet and follow the on-screen instructions.
Do not exit DJI Mimo while updating the firmware. Pay attention to on-screen prompts. The system status indicator will blink green and red alternatively and become solid green once the firmware update has completed successfully.
If an update is unsuccessful, restart DJI Mimo, reconnect the Bluetooth, and retry.
Osmo Mobile 6 is designed to be folded for easier storage and transportation. Make sure to fully retract the built-in extension rod and fold the Osmo Mobile 6 after powering off. Rotate the pan and tilt axis as shown and fold the gimbal. The mark on the axis arm should slot into the hole on the handle. Rotate the pan axis as shown to lock in place.
General | |
Gimbal Dimensions | Unfolded: 276×111.5×99 mm (L×W×H) Folded: 189×84.5×44 mm (L×W×H) |
Weight | Gimbal: Approx. 309 g Magnetic Phone Clamp: Approx. 31 g |
Max Length of Built-in Extension Rod | 215 mm |
Compatible Phone Weight | 170-290 g |
Compatible Phone Thickness | 6.9-10 mm |
Compatible Phone Width | 67-84 mm |
Battery | |
Type | Li-Po 2S |
Chemical System | LiCoO2 |
Capacity | 1000 mAh |
Energy | 7.74 Wh |
Voltage | 6-8.8 V |
Charging Temperature | 5° to 40°C (41° to 104°F) |
Operating Temperature | 0° to 40°C (32° to 104°F) |
Operating Time | Approx. 6 hours and 24 minutes (measured under ideal conditions with the gimbal fully balanced) |
Charging Time | Approx. 1 hour 24 minutes (measured with a 10W USB-C charger) |
Gimbal Charging Port | USB-C |
Power Output Port | N/A |
Bottom Port | 1/4"-20 Screw Hole |
Gimbal | |
Power Consumption | 1.1 W (Approximate, measured under ideal conditions) |
Controllable Range | Pan: -95° to 95° Roll: -100° to 175° Tilt: -25° to 40° |
Mechanical Range | Pan: -161.64° to 173.79° Roll: -120.30° to 211.97° Tilt: -101.64° to 78.55° |
Max Control Speed | 120°/s |
Wireless Mode | |
Model | Bluetooth 5.1 |
Other | |
App | DJI Mimo |
Grip Tripod | |
Dimensions | Length: 138 mm Diameter: 32 mm |
Weight | Approx. 72 g |
WE ARE HERE FOR YOU
Contact DJI SUPPORT
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the OSMO Mobile 6 and is the answer not in the manual?
Questions and answers