Advertisement
Quick Links
C
R– R+
L+ L–
OUTPUT
A
A) Connect LEFT & RIGHT Channel Outputs of "Amplifier A" to BLOCK A
B) Connect LEFT & RIGHT Channel Outputs of "Amplifier B" to BLOCK B
C) Connect LEFT & RIGHT Speakers Inputs to BLOCK C
When used as as Speaker Switch only one Pair of Speakers can be operated at a time.
A) Connect LEFT & RIGHT Inputs of "Speaker Pair A" to BLOCK A
B) Connect LEFT & RIGHT Inputs of "Speaker Pair B" to BLOCK B
C) Connect LEFT & RIGHT Channel Outputs of Amplifier to BLOCK C
Copyright © 1997 OEM Systems Company, Inc., Sparks, Nevada, 702 355-0405
B
2 Sources — 1 Pair of Speakers
1 Source — 2 Pairs of Speakers
IW-101
A / B Switch
Source 1 or Source 2
or
Speaker Pair A or Pair B
See Reverse Side for
IMPORTANT Precautionary
and
Installation Information
Product available in
White, Ivory & Almond finishes
All rights reserved
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for OEM IW-101
Summary of Contents for OEM IW-101
- Page 1 C) Connect LEFT & RIGHT Speakers Inputs to BLOCK C 1 Source — 2 Pairs of Speakers When used as as Speaker Switch only one Pair of Speakers can be operated at a time. A) Connect LEFT & RIGHT Inputs of "Speaker Pair A" to BLOCK A B) Connect LEFT &...
-
Page 2: Important Information
"common ground" type connections. A) Wiring to and from switch should be "CL-2 or CL-3" rated. Use 16 gauge or larger for runs in excess of 100 feet. B) Strip ¼" off each wire. Ensure all strands are twisted together and inserted into respective terminals.
Need help?
Do you have a question about the IW-101 and is the answer not in the manual?
Questions and answers