Advertisement
Manual / 3092000705 / - 06
XLC DUO KIDS TRAILER BS-C10
Next, install wheel as shown. Open the quick release axle skewer to allow the axle to fit inside the metal fork
tips. Fit the hook in the align the flats on the axle with the flats on the fork tips, and slide into the slots. Fit the
hook of the safety tab in the hole in the fork tip, then close the QR lever, making sure it is tight. If the wheel is
still loose in the frame, open the release lever, tighten the thumb nut, and close the lever again. Repeat this until
there is sufficient resistance to securely lock the wheel. Note: Do not remove the safety washer from the axle.
Failure to use the safety lock washer may result in the front wheel falling out. If lost or damaged, contact your
place of purchase or a bicycle dealer to purchase a replacement.
18. ATTACHING STROLLER WHEEL
Your trailer has a convenient front swivel stroller wheel for use in shopping, at the park, or in situations where
the jogger kit may not be appropriate due to lack of maneuverability. The swivel wheel attaches to a mount in
the center front of the frame. To install the wheel, simply insert the stroller wheel in the receiver and push until it
"Clicks" into place.
To remove the wheel, simply depress the button on the housing to release the wheel.
20
Manual / 3092000705 / - 06
XLC DUO KIDS TRAILER BS-C10
19. SUSPENSION SET UP
Your trailer is equipped with a suspension for comfortable rides. You can find it on the right side of the trailer.
The suspension can be individually adapted. Three setups can be chosen by turning the handle shown like
below.
20. FEATURE FOR CABLE LOCK
In case you want to leave the trailer unattended for a while you have the feature to fix a cable lock (not included)
directly through the frame of the trailer.
21
Advertisement
