BeaverLAB DDL-M2 Instruction Manual page 12

Microscope Monoblock
Power Button
Press and hold for 3 seconds
to turn on the phone.
Press and hold for 3 seconds
to turn off the phone.
Microscope Monomer
Interface
Charging and connecting to
the computer side of the
software to use.
Microscope On And Off
Press and hold the microscope rear power on button for 3 seconds, the lower small light of the button lights
up or the bottom illumination lights up, that means the microscope has been turned on.
Press and hold the on button at the back of the microscope for 3 seconds, and the small light at the bottom
of the button goes out or the bottom illumination goes out, which means the microscope has been turned off.
Microscope Magnification Adjustment
09
( Note: After using the microscope, please put the lens cap on. )
Digital Zoom Button
Short press to digitally enlarge.
Brightness Dimming Key
A short press, brightness
brightening a grade.
Digital Reduction Key
Short press to
digitally reduce.
Brightness Dimmer Key
Short press to dim the
brightness by one stop.