Loading the Battery
Before using the Camera, end users must load NP 60 Battery.
1.
Follow the arrow direction and slide to eject the
battery cover.
2.
Insert the batteries according to the correct
polarity marks ( + or -).
3.
Close the battery cover firmly.
Inserting and Removing an SD Card (Optional)
The Camera comes with internal memory which allows you to store pictures, movies, voice recordings
and music. You can expand the memory capacity by using an optional SD memory card. To insert a
memory card, refer to the figure as below:
1.
Insert the memory card into the right position.
2.
To remove an installed SD card, press the card
inwards to release it.
3.
When the card pops out, gently remove it from its
slot.
Note
When a memory card is fitted, movies and pictures are saved on card rather than on the built-in
memory.
Getting Started
8
Section 2
Eject
EN