Reset Pairing - Aputure Array Trans Product Manual

6. Reset pairing

Press the reset button for about 10s, you can clear the pairing addresses stored, and pair again by
repeating the above fth operations.
Tips and trouble setting
1. Please charge the battery within 5 minutes after the low battery warning appeared in case of
unstable work.
2. In order to obtain the best use e ect, we recommend that the antenna corresponding angle of
the transmitter and the receiver is less than 15°.
3. When the distance between the transmitter and the receiver is about 38M, the signal will be
automatically disconnected because of the blind transmission, then you can make it connected
automatically by increasing or decreasing the distance.
4. This product supports mini USB rmware upgrading, you can update rmware according to the
direction on our o cial updating website: http://www.aputure.com/array-trans/update
15℃
-6-