Core Unit Label - Sony ST26i Working Instructions

Reassembly
Apply 10 ± 1 Ncm torque when tightening the three Screw
M1.6*4.2 with Bits (T5).
Apply 10 ± 1 Ncm torque when tightening the Screw
Lanyard M1.6*3.2 with Bits (T5).
5.6

Core Unit Label

Check that the proper label format is loaded in the Zebra
printer and print a new Label by using the 'LabelMake'
software.
One label only is allowed!
Press along the surface to secure the attachment.
1268-3894 Rev 2
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
55(57)