Replacement
4.12 Connector Film (Back side of Main PBA)
Follow the 3.1 – 3.7 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Connector Film.
Carry out the Installation as described below.
Follow the 5.2 – 5.8 Reassembly instructions!
REMOVAL
Peel off the Connector Film.
Scrap! Not to be reused!
INSTALLATION
Place a new Connector Film in the correct position as shown
in the picture.
Press to secure its attachment.
1268-3894 Rev 2
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
23(57)