Cleaning Your Tongue; Replacing The Brush Head - Silk'n SONICSMILE PLUS DCA03 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
8. Within 5 seconds, press the operation button a fourth time.
EN
The product is now in the "Polish" mode. It is suitable for
polishing teeth.
The indicator light illuminates purple in this mode.
9. Within 5 seconds, press the operation button a fifth time.
The product is now in the "Massage" mode. It is suitable for
gently massaging your gums and improving your gum health.
The indicator light illuminates blue in this mode.
10. Brush the upper and lower parts of your teeth as well as the
outer and inner sides of each quadrant for 30 seconds. Make
sure you do not apply too much pressure.
The product briefly pauses every 30 seconds as a reminder to
change your brushing area and automatically switches off after
2 minutes. You can also switch off the product anytime by
pressing the operation button once.
11. Clean the product after each use (see chapter "Cleaning").

6.2 Cleaning your tongue

1. The back of the brush head
area. Wet it and brush your tongue in a back and forth motion
for 30 seconds. Clean as far back as comfortable.
2. Rinse your mouth after cleaning.

7 Replacing the brush head

• Replace the brush head
• You can purchase new brush heads on our website at
Make sure the product is switched off when replacing the brush
head.
• To remove the brush head, gently pull it off from the product.
• To attach the brush head, align its bristles with the operation
button
product (see Fig. C).
Avoid applying too much pressure. There should be a small
gap between the brush head and the product.
13
to wear or at least every 3 months.
www.silkn.eu.
and gently push the brush head onto the top of the
2
contains a tongue cleaning
1
as soon as the bristles start
1

Advertisement

Table of Contents
loading

Table of Contents