Control Screen - Gantom STORM FORM User Manual

CONTROL SCREEN

o Address – This box shows the address that will be
assigned to the fixture if you hit the "Assign Address"
button
o Assign Address – Hitting this button will assign the
selected address to the fixture. The light fixture should
blink in response to having a new address assigned.
o Save button – this will allow you to save a settings
profile into the app. Use this if you need to configure
many fixtures to have the exact same settings. Please
note that this button DOES NOT save the current
profile or address to the fixture.
o Console Sliders – These sliders allow you to set
intensity levels for each channel. Only the CH1 slider
will work with the Storm Form DMX
o Store as Default – hitting this will save the current
color and brightness to be the default state for the
light when it turns on. If the light does not see DMX
signal when it is powered on, it will go to this state.
Storm Form and Storm Form DMX User Guide Version 1.1 – 2/25/2021