Table of Contents
Advertisement
B
Searching for a station in your site by
designating an area [STATIONS BY AREA]
1
Select [STATIONS BY AREA] from the SEARCH
LIST. (→P. 13)
2
Click
to select the target area in your site from
the list (so that it is highlighted), and then click
select.
All the stations in the area are displayed in the list.
3
Click
to select the target station (so that it is
highlighted), and then click
C
Searching for a station in your site by
designating a station type [STATIONS BY TYPE]
1
Select [STATIONS BY TYPE] from the SEARCH
LIST. (→P. 13)
All the station types are displayed in the list.
2
Click
to select the target station type from the
list (so that it is highlighted), and then click
select.
All the stations of the selected type are displayed in the list.
3
Click
to select the target station in your site (so
that it is highlighted), and then click
to
.
to
.
D
Searching for a paging zone in your site from the
list [PAGING ZONE]
1
Select [PAGING ZONE] from the SEARCH LIST.
(→P. 13)
All the registered paging zones are displayed in the list.
2
Click
to select the target zone (so that it is
highlighted), and then click
E
Searching for a chime zone in your site from the
list [CHIME ZONE]
1
Select [CHIME ZONE] from the SEARCH LIST.
(→P. 13)
All the registered chime zones are displayed in the list.
2
Click
to select the target zone (so that it is
highlighted), and then click
3
Click
to select the sound source of chime from
the list (so that it is highlighted), and then click
F
Searching for a remote site as the target of
calling, paging or chime paging from the list
[REMOTE SITE]
1
Select [REMOTE SITE] from the SEARCH LIST.
(→P. 13)
All the registered remote sites are displayed in the list.
2
Click
to select the target site (so that it is
highlighted).
3
After clicking
, select the performance you want
to do from [CALL], [PAGING] and [CHIME] from the
list (so that it is highlighted).
.
.
.
15
Advertisement
Table of Contents
