Table of Contents
Advertisement
For the first time only :
Use [the Number buttons] to enter any 4-digit
number (except for 4737). That number will be used as
the password. Record your password, in case you
forget it.
• If you forget the password, enter [4], [7], [3], [7].
The password will be cleared and rating level will be
set to "Off".
• While you input the password, select "Clear" to
clear the number, then re-enter the password.
Once a password is set :
Use [the Number buttons] to enter your 4-digit
password.
4. Use [K / L] to select your desired parental lock level,
then press [OK].
5. Press [
(home)] to exit.
RATING EXPLANATIONS
Off
•
Parental control is inactive; all discs
can play back.
8 [Adult]
•
DVD software of any grades
(adult / general / children) can be
played back.
7 [NC-17]
•
No one under 17.
6 [R]
•
Restricted; under 17.
5 [PGR]
•
Parental Guidance Recommended.
4 [PG-13]
•
Unsuitable for children under 13.
3 [PG]
•
Parental Guidance suggested.
2 [G]
•
General Audience.
1 [Kid Safe]
•
Suitable for children.
To cancel parental lock temporarily :
Some discs allow you to cancel parental lock temporarily.
With these discs, the message below will appear when you
try to play them back.
"Enter current password."
Follow the instruction which appears on the TV screen to
cancel parental lock. After entering the password, "Parental
Control" appears. Select desired parental lock level, then
press [OK].
Change Password
1. Follow steps 1 to 2 in "Parental Control" on page 46.
2. Use [K / L] to select "Change Password", then press
[OK].
3. Use [the Number buttons] to enter your 4-digit
password.
4. Use [the Number buttons] to enter a new 4-digit
password.
5. Use [the Number buttons] to retype the same new
4-digit password.
6. Use [K / L / s / B] to select "Confirm", then press
[OK].
7. Press [
(home)] to exit.
12.6. Software Update
(home)
A
"Setup"
Philips continuously tries to improve its products and we
strongly recommend that you update the software when
updates are available. New software can be downloaded
from our website at www.philips.com/support using the
model number of your Blu-ray Disc™ Player (e.g.
BDP3306) to find information.
Disc / SD Card Update
You can update the software by using a disc or SD card.
1. Use [K / L / s / B] to select "Setup" in the home
menu, then press [OK].
2. Use [K / L] to select "Advanced Setup", then press
[OK].
3. Use [K / L] to select "Software Update", then press
[OK].
4. Use [K / L] to select "Disc" or "SD Card", then press
[OK].
5. Use [s / B] to select "Yes", then press [OK].
6. Insert the disc or SD card for software update.
7. After loading the disc or SD card, confirmation message
will appear. Select "Yes" and press [OK] to start
updating.
• It may take a while to complete the update.
8. After the update finishes, this unit will restart. Remove
the disc or SD card from the unit.
C Caution
•
Please do not disconnect the AC power cord or SD
card while executing the "Disc" or "SD Card" update.
"Advanced
"Software
A
A
Setup"
Update"
EN - 47
Advertisement
Table of Contents
