Auto Scan - Philips BDP3306 User Manual

Wireless
If you connect this unit to the Wi-Fi network, select
"Wireless" and set up necessary settings.
Please make a note of your Wi-Fi network name (SSID) and
its WEP / WPA key before proceeding with the setup.

Auto Scan

Search for Wi-Fi networks automatically and select the Wi-Fi
network name (SSID) from the list.
1. Follow steps 1 to 2 in "Auto Setup" on page 42.
2. Use [K / L] to select "Wireless", then press [OK].
3. Use [K / L] to select "Auto Scan", then press [OK].
• This unit will start searching for Wi-Fi networks
automatically.
4. The result of Wi-Fi network searching will be displayed.
Use [K / L] to select the appropriate Wi-Fi network
name (SSID), then press [OK].
• If you select an SSID without " ", please go to step 6.
Please select the
access point.
Rescan
Cancel
5. "Access Point Setting (Auto Scan)" screen will appear.
Enter the WEP / WPA key of the selected Wi-Fi
network using cursor buttons, number buttons and
color key, then press [Red].
• If you do not know the WEP / WPA key for your
Wi-Fi network, ask your ISP or the person who set
up your Wi-Fi Network.
Access Point Setting (Auto Scan)
Please input the WEP/WPA key with keypad or software keyboard.
XXXXXXXXXX
Done Cancel
EN - 44
Access 1
Access 2
Access 3
Access 4
Access 5
Access 6
Access 7
Clear a/A/@
6. Use [K / L] to select "Continue", then press [OK].
Please confirm the
setting.
Continue
Rescan
Cancel
7. Use [K / L] to select "Auto Setup" or "Manual Setup",
then press [OK].
• If you select "Auto Setup", follow step 5 in "Auto
Setup" on page 42.
• If you select "Manual Setup", follow steps 3 to 12 and
14 to 16 in "Manual Setup" on page 42.
D Note
• The internal wireless LAN supports following
specifications.
- Wi-Fi standards
- Frequency spectrum : 2.4 GHz
- Security protocol
SSID Access 1
Security WPA-PSK(AES)
WEP/WPA Key XXXXXXXXXX
: IEEE 802.11 b/g/n
: WEP / WPA / WPA2