Panasonic KX-TG1611FX Operating Instructions Manual page 30

Useful Information
Liquid damage
Problem
Liquid or other form of
moisture has entered the
handset/base unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Registering a handset to the base unit
1
Handset:
M N#130
2
Base unit:
Press and hold M
R If all registered handsets start ringing, press M
(KX-TG1612/KX-TG1613)
3
Handset:
M N a Wait until "<Base PIN>" is displayed. a Enter the base unit PIN (default:
"0000"). a M
R If you forget your PIN, contact an authorised service centre.
Deregistering a handset
1
M N#131
R All handsets registered to the base unit are displayed.
2
MbN: Select the handset you want to cancel. a M
3
MeN
Changing the base unit PIN
Important:
R If you change the PIN (Personal Identification Number), please make note of your new PIN.
The unit will not reveal the PIN to you. If you forget your PIN, contact an authorised service
centre.
1
M N#132
2
Enter the current 4-digit base unit PIN (default: "0000").
3
Enter the new 4-digit base unit PIN. a M
4
MeN
30
Cause/solution
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
N for about 5 seconds.
N
N again to stop, then repeat this step.
N 2 times.
N 2 times.