Automatic Wireless Stereo-Link Tm - ION GEODE ROCK SPEAKERS User Manual

A A utomatic Wireless Stereo-Link
1 - PRESS & HOLD
(speaker 1)
To sync both Geode
1. Press and hold the P P ower button to turn on one speaker. You will hear "Power On" and
"Bluetooth Mode" if voice prompts are enabled. This will be the primary speaker.
2. If you are not already connected, pair your Bluetooth device to the primary speaker using
the directions above.
3. Power on the second speaker by pressing and holding the P P ower button.
4. The two speakers will automatically begin searching for each other. Once a connection is
established, you will hear "Linked" (if voice prompts are enabled) and the L L EDs on both
speakers will be lit solid blue.
Note: Speakers should be within 50' (15 m) of each other to properly link. The closer the
speakers are, the faster they will link.
5. You can now begin streaming audio from your Bluetooth device, which will play from both
the primary and secondary speakers at the same time.
ION Audio Geode™ Rock Speakers User Guide
TM
Rock Speakers together:
TM
TM
GEODE ROCK SPEAKERS
2
4 - LINKED
3 - PRESS & HOLD
(speaker 2)
9