Table of Contents
Advertisement
Updating the Firmware
Firmware updates of the instrument can be done by using one of
the supported programming interfaces.
Updates and patches are available on the Keysight Web at:
http://www.keysight.com/find/pulse_generator
They are applied by downloading the update/patch from the web
(single executable) and running it.
The connection path to the instrument is queried for the time the
executable is run. A warning is issued if a new firmware revision
would be overwritten by an older one. Nevertheless, this down-
grade can be forced.
Prerequisites
The instrument must be connected to a PC through one of the
supported remote programming interfaces. The operating system
running on the PC must be either Windows NT, Windows 2000, or
Windows XP.
An upgrade/patch always includes all parts of the software (that is
firmware and BIOS).
Keysight 81133A/81134A Pulse Generator User's Guide, April 2015
87
Advertisement
Table of Contents
