Pulses - Keysight Technologies 15433B User Manual

Using the Keysight 81133A/81134A Pulse Generator
Characteristics
80

Pulses

The following figure shows the typical timing for continuous pulses.
• Pulse periods can be either generated continuously or can be
started manually or by the arming source.
• Delay, pulse width (or duty cycle) and deskew can be set for
each channel.
• The instrument mode is Pulse/Pattern.
• The pattern mode is Pulse.
• For the clock source, you can select from:
– Internal (YIG Oscillator)
– External signal at Clock Input
– External 10 MHz Reference at Clock Input
For more information about the clock sources, see
Sources" on page 75.
• The Trigger Out is generated with every clock pulse, but can be
optionally divided by any number in the range 1 ... 2
See also "Trigger Out" on page
Keysight 81133A/81134A Pulse Generator User's Guide, April 2015
Timing of Generated Signals
"Clock
31
77.
– 1.