Play With The Settings - Keysight Technologies 15433B User Manual

Setting Up Generic and Advanced Signals
Clear Eye
50 % Variable Crossover
66
Setting Up Signals for a Stressed Eye Diagram Measurement

Play with the Settings

The delay control input adds additional delay to the signal
depending on the voltage that is fed to the input.
• On the 33250A, you can change the amplitude and frequency of
the signal to show the influence of the delay control input.
• Change from sine wave to rectangular wave by pressing the
corresponding button.
You can also change the variable crossover point on the 81134A
Channel panel.
The following signals show a clear eye, a signal modulated with
sine wave and a signal modulated with rectangular wave.
Delay modulated with sine
wave
30 % Variable Crossover
Keysight 81133A/81134A Pulse Generator User's Guide, April 2015
Delay modulated with
rectangle wave
70 % Variable Crossover