Page 4
IEEE 802.3af powered device, such as a third party Wireless Access Point, IP Phone, or IP Camera over Cat 5 wiring. The DA2400 has four “Data” input RJ45 jacks and four “Data and Power” output RJ45 jacks. The unit’s power is supplied by an included 48VDC 1.5A AC adapter.
Page 5
Figure 3 shows the DA2400 connection area including: Four Data Input RJ45 jacks 48VDC Power Input jack Four Data and Power Output RJ45 jacks Power LED – indicates DA2400 has input 48VDC power Four Port LEDs – indicates that port is providing 48VDC power Data & Data...
Page 6
AC source. NOTE: If the DA2400 is going to be wall mounted, use the keyhole slots on the rear of the unit by hanging it on the screws that are first installed in the wall or on a piece of plywood.