Advertisement
TYRE INFLATOR
DIGITAL
The Jamec Pem Digital Tyre Inflator features a robust rubber outer with
a durable aluminium body and one touch operation, perfect for industrial
workshops, mechanics and garage.
FEATURES
„ Includes Certificate of calibration
„ Multi-scale gauge
„ Large backlit digital display
„ Accuracy exceeds EC Standards
„ Auto on upon pressure sensing
„ Auto off after 90 seconds
„ Tough die-cast aluminium housing
„ Wire sheathed hose eliminates kinking
„ Impact absorbing bumpers
SPECIFICATIONS
Operation
Supply pressure max.
Max. inflation
Chuck type
Chuck style
Scale
Inlet size
Hose length
Accuracy
Inflation volume L/min
Power source
Battery life (continuous use)
Auto OFF
Weight
Advised application
MAINTENANCE MONTHLY
Remove the 'oil' screw on the side of the gauge and place 2-3 drops of
'light' oil into the gauge mechanism.
Inflate / deflate / measure
200 psi
174 psi
Clip on
Single straight
psi, kPa, bar
1/4" BSP
500 mm
2 psi @ 25 - 75 psi
1200 L/min @ 200 psi
2 X AAA
65 hr
90 sec
.8 kg
Industrial, workshops
IMPORTANT
This tyre inflator must only be connected to air line systems which have
clean dry air. Any moisture in the air line system may cause damage to
the operation of this tyre inflator and void warranty.
Air pre-filters must be used with this inflator to ensure product accuracy
and longevity.
OPERATION
TO READ PRESSURE:
Remove tyre valve cap. With clip-on air chuck lever depressed, firmly press
chuck onto tyre valve stem and release lever, ensure that no air leaks.
Check pressure gauge.
Digital - the digital display will activate once the tyre pressure is sensed.
If no pressure is sensed the display will not turn on. Press the tyre inflator
lever to add air into the tyre, before reading the pressure.
Analogue - the dial gauge will activate once the tyre pressure is sensed. If
no pressure is sensed ,press the tyre inflator lever to add air into the tyre,
before reading the pressure.
TO INFLATE:
With clip-on air chuck lever depressed, firmly press chuck onto tyre
valve stem and release lever, ensure that no air leaks. Fully depress the
tyre inflator lever for an appropriate period of time and release the lever.
Check pressure gauge and repeat the procedure until correct pressure level
is achieved.
TO DEFLATE:
With clip-on air chuck lever depressed, firmly press chuck onto tyre valve
stem and release lever, ensure that no air leaks. Depress the tyre inflator
lever half way (until air can be heard to be escaping) for an appropriate
period of time and release the lever. Check pressure gauge and repeat the
procedure until correct pressure level is achieved.
SAFETY
Never exceed the maximum pressure of the tyre. Check that the hose and
chuck are in good condition with no damage or cracks. Ensure safe working
environment when using compressed air. Return to authorised service agent
for repair and maintenance.
WARNING
To avoid risk of personal injury, especially to the eyes, face and skin
DO NOT direct the air stream at any person, or any part of the body.
This equipment is not intended for use by children without adult
supervision. The manufacturer reserves the right to change product
features at any time without notice.
Advertisement
