Page 1
TYRE INFLATOR DIGITAL OPERATING INSTRUCTIONS PRODUCT NO. 11.0523...
Page 2
Air pre-filters must be used with this inflator to ensure product accuracy The Jamec Pem Digital Tyre Inflator features a robust rubber outer with and longevity. a durable aluminium body and one touch operation, perfect for industrial workshops, mechanics and garage.
Page 3
BATTERY REPLACEMENT Unscrew front LCD panel using Phillips head screwdriver. Access screws through slots in rear of unit. Open the front LCD panel using a flat blade screwdriver Insert new battery making sure of positive and negative polarity Close front LCD panel Refix front LCD panel by re-tight- ening screws at rear of unit using Phillips head screwdriver...
Page 4
CALIBRATION CERTIFICATE This Tyre Inflator Part Number: 11.0523 has been calibrated in its normal working position on test equipment with an accuracy that is traceable to standards according to: EN12645: 2014 Serial Number: Date: ALLOWABLE TOLERANCE ± 1.2 Up to and including 58 psi ±...