Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JAMEC PEM 11.0578
Summary of Contents for JAMEC PEM 11.0578
- Page 1 TYRE INFLATOR DIGITAL AUTOMATIC OPERATING INSTRUCTIONS PRODUCT NO. 11.0578...
- Page 2 „ Automatic Tyre Inflator with power cord „ 7.6 m (25 ’) Air Hose The Jamec Pem Digital Automatic Tyre Inflator represent quality and „ Hook and M6 x 38 screw kit (1pc) guaranteed accuracy. The classic handheld, slimline design is easy to hold „...
-
Page 3: Operation
OPERATION PRODUCT IDENTIFICATION The device includes the OPS (Over Pressure Setting) function which allows for the tyre’s pressure to be set very high and then reduced to the pre-determined pressure. This is very handy for use when a new tyre is fitted to a rim. -
Page 4: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Air leak Leak in the connection Check the pneumatic connection Obstruction in the filters or Clean the filters and check the air tube The inflator works, but no air inflated in air system No display Check power supply Reconnect Inflation does not start, although... -
Page 5: Calibration Certificate
CALIBRATION CERTIFICATE This Tyre Inflator Part Number: 11.0578 has been calibrated in its normal working position on test equipment with an accuracy that is traceable to standards according to: EN12645: 2014 Serial Number: Date: ALLOWABLE TOLERANCE ± 1.2 Up to and including 58 psi ±...
Need help?
Do you have a question about the 11.0578 and is the answer not in the manual?
Questions and answers