Advertisement
Tool Description
Screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Unscrew the screws on mounting angle 2, and then remove mounting angle 2 from the chassis.
2.
Unscrew the screws on front panel 3, and then remove front panel 3 from the chassis.
3.
Unscrew the screws on front panel 4, and then remove front panel 4 from the chassis.
4.
Unscrew the screws on blank panel 5, and then remove blank panel 5 from the chassis. The others should be removed
5.
Unscrew the screws on part 6, and then remove part 6 from the chassis. The others should be removed in the same
6.
Unscrew the screws on power module 7, and then remove power module 7 from the chassis.
7.
Unscrew the screws on part 9 , part 10,and then remove part 9 , part 10 from chassis.
8.
Remove film 11 from chassis.
9.
Unscrew the screws on blank panel 12, and then remove blank panel 12 from the chassis.
10. Unscrew the screws on panel 13, and then remove panel 13 from the chassis.
11. Unscrew the screws on fan frame 14, and then remove fan frame 14 from the chassis.
12. Unscrew the screws on rear cover 15, and then remove rear cover 15 from the chassis.
13. Unscrew the screws on part 16, and then remove part 16 from the chassis.
14. Unscrew the screws on part 17, and then remove part 17.
15. Remove all of the inner cables.
16. Unscrew the screws on PCB 18, and then remove PCB 18.
17. Unscrew the screws on PCB 19, and then remove PCB 19.
18. Remove all of the labels.
19. Unscrew the screws on wire channel 2-2, and then remove wire channel 2-2 from mounting angle 2-1.
20. Unscrew the screws on pcb 3-2, and then remove pcb 3-2 from front panel 3-1.
21. Remove shielding finger 3-3 from front panel 3-1.
22. Remove film 3-4 from front panel 3-1.
23. Unscrew the screws on part 4-2, and then remove part 4-2 from front panel 4-1.
24. Unscrew the screws on pcb 4-3, and then remove pcb 4-3 from front panel 4-1.
25. Remove shielding finger 4-4 from front panel 4-1.
26. Remove film 4-5 from front panel 4-1.
27. Unscrew the screws on part 5-2, and then remove part 5-2 from blank panel 5-1.
28. Remove shielding finger 5-3 from blank panel 5-1.
29. Remove film 5-4 from blank panel 5-1.
30. Unscrew the screws on part 12-2, and then remove part 12-2 from blank panel 12-1.
31. Remove shielding finger 12-3 from blank panel 12-1.
32. Remove film 12-4 from blank panel 12-1.
33. Unscrew the screws on pcb 13-2, and then remove pcb 13-2 from front panel 13-1.
34. Remove shielding finger 13-3 from front panel 13-1.
35. Remove film 13-4 from front panel 13-1.
36. Unscrew the screws on part 14-2, and then remove fan 14-2 from fan frame 14-1.
37. Remove all of the cables.
38. Unscrew the screws on PCB 14-3, and then remove PCB 14-3 from fan frame 14-1.
39. Unscrew the screws on fan 14-4, and then remove fan 14-4 from fan frame 14-1.
40. Remove film 14-5 from fan frame 14-1.
41. Remove shielding finger 14-6 from fan frame 14-1.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
Tool Size (if
applicable)
2#
Page 2
Advertisement
