FeiYu Tech SCORP Mini P Quick Start Manual page 4

2.2 Adjust the gimbal to gimbal balancing position
The gimbal is folded by default, please unlock all the three axes and adjust the gimbal to
gimbal balancing position, and then lock the three axes.
Gimbal folded position
3. Mounting the Smartphone
Make sure you have completed all the steps which mentioned in "chapter 2. Getting started"
and the gimbal is adjusted to gimbal balancing
smartphone case before mounting the smartphone.
Take horizontal mounting as an example:
(1) Power off the gimbal or enter sleep mode first, then rotate the smartphone holder to make
it vertical to prepare for landscape shooting.
(2) Extend the smartphone holder, and put your smartphone in, keep the smartphone holder
in center.
Note: before switching the mounting direction, the gimbal required to be off or in sleep mode.
Gimbal balancing position
position. It is recommended to remove the
EN
4. Gimbal Balancing
Please balance the gimbal before powering it on. Before balance the
gimbal, please power off it or enter sleep mode.
(1) Unlock the three axis locks ①
(2) If the phone is tilted to one end, it means that the center of gravity is toward this end,
and the fixing knob needs to be loosened
direction ③ , until the cross arm maintains a horizontal balance.
(3) tighten the fixing knob ② .
5. Operation
5.1 Power ON/ OFF
Before power on the gimbal, make sure you have balanced gimbal, and unlocked all the three
axes. If you haven't unlocked all the 3 axes, gimbal will enter sleep mode to protect itself.
Please single tap power button to wake up gimbal after unlocked all the 3 axes.
Long press the power button and release it when you hear the beep sound to power on/ off.
- 4 -
, observe the tilt direction of the mobile phone.
② , and then move the cross arm in the opposite
3
2
1
Tutorial Videos