Advertisement
Thank you for purchasing this product. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product. It is recommended that this product
should only be installed by persons competent in DIY. Before beginning assembly, please
ensure you have all parts outlined in the parts list below.
Parts list
Glass shelf
Brackets with retaining screws (×2)
Wall screws ( ×4)
Wall plugs (×4)
Material composition
Tempered glass shelf
Zinc alloy brackets
Assembly
You will need a power drill, 6mm masonry drill bit, medium cross-head and slot-head screw -
drivers, tape measure, spirit level and a pencil to install this product.
Ensure the wall surface is of suitable strength and construction.
Note: The wall plugs provided are suitable for solid stone or brick walls. For other wall types
(e.g hollow plasterboard) use appropriate wall plugs and drill bit.
If in doubt, consult a quali ed person.
!
1
2
3
4
5
7
!
6
HS09_RTL_280818
Advertisement
