How To Use; Temperature Adjustment; Drain Tray - Hisense HSC-192FLB Operation Manual

INSTRUCTION MANUAL

HOW TO USE

BEFORE USE
Remove shipping package, tape, etc, and leave doors open ventilation for a while.
The unit is cleaned before shipment. However, clean the compartment interior once after delivery.
Please insert power supply plug into the wall outlet ,singte-phale to cat voltage.
Allow the unit to operate for about 1 hour to cool the compartment before placing items in the cooler.
WAIT 5 MINUTES OR MORE BEFORE RE-STARTING
Restarting the unit immediately after it has been turned off may cause fuses to blow and activate the
circuit-breaker, the compressor may be overloaded, and/or other damage may occur.

TEMPERATURE ADJUSTMENT

Thermostat was adjusted using temperature at factory. To adjust it, turn right could cause temperature in
showcase down. To raise the temperature, turn it left. Excessive refrigeration will increase electricity
consumption unnecessarily.

DRAIN TRAY

Defrosting is performed automatically and drain water is collected in the drain tray.
Water is in the drain tray is evaporated automatically. In humidity, large amount of water in the drain
tray, so please throw away drain water once a day.
EFFICIENT USE
Please follow the below instruction, you could save energy.
To prevent cold air from escaping, open and close the door quickly and keep the door opened
for as short a time as possible.
Please install the unit in the place which is well-ventilated.
SHELF HEIGHT ADJUSTMENT
The shelf height can be adjusted.
Arrange the shelves in accordance with the dimensions of the items to be placed in the cooler.
12