Jet Wash - Yamaha 210FSH SPORT 2022 Operator's Manual

Equipment operation

Jet wash

WARNING
The jet wash system must be used only by
a passenger who is not operating the boat.
While the jet wash system is being used,
the boat operator must attach the engine
shut-off cord (lanyard) to their PFD and
scan constantly for people, objects, and
other watercraft.
NOTICE
 If the jet wash system will not be used
for an extended period, turn the shut-off
valve to the closed position. To prevent
water from freezing in the jet wash hos-
es when storing the boat in freezing
temperatures, drain the water from the
hoses. For more information, contact a
Yamaha Boat Dealer. Before using the
jet wash system, make sure that the
shut-off valve is in the open position. If
water leaks from the hose fitting or coil
hose or if you notice any other problem,
turn the shut-off valve to the closed po-
sition immediately.
 While the jet wash system is being used,
scan constantly for people, objects, and
other watercraft. Otherwise, the boat
could collide with another watercraft, a
dock, or other obstacle.
 210FSH DELUXE: Before using the jet
wash system, make sure that the anchor
light socket is closed. If the anchor light
socket is not closed and water enters
the socket, the socket could malfunc-
tion.
The hose fitting for the coil hose is located on
the deck near the jump seat (starboard).
71
1
1 Hose fitting
To use the jet wash:
(1) Connect the coil hose to the hose fitting.
1
1 Coil hose
2 Hose fitting
(2) Start the engines. (See page 96.)
(3) Push the jet wash switch.
1 Jet wash switch
2
1
JET
WASH