Table of Contents
Advertisement
Operation and handling requirements
1
2
1 Dipstick
2 Maximum level mark
3 Minimum level mark
(8) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha Boat dealer. If the engine oil
level is below the minimum level mark,
slowly add engine oil.
(9) Repeat steps (6)–(8) until the engine oil is
at the proper level.
(10) Securely install the oil tank filler cap and
turn it until it stops.
(11) Repeat the checking oil level procedure
for the other engine.
(12) Close the engine hood.
81
3
Draining the bilge water
NOTICE
Do not run the engines at full throttle
when bilge water remains in the engine
compartment. The bilge water can
splash into the engines, which can result
in severe damage.
Be sure all drain plugs are tightened be-
fore operating your boat. Otherwise,
water may flood the boat and cause it to
submerge.
Draining the bilge water on land
This model is equipped with multiple drain
plugs.
Bilge water from the various compartments
flows through drain passages and collects in
the bottom of the hull. The bilge water can be
drained from the boat by removing the hull
drain plug.
Lockable storage compartment
1
Drain plug
1
Advertisement
Table of Contents
