Using The Appliance With Additional Accessories - Silvercrest SST 40 A1 Short Manual

Using the appliance with additional accessories

NOTE
► Always vacuum at level 3 when using additional accessories in order to achieve
optimum vacuuming results.
To use the additional accessories, you must fit the short handle g, the carrying
strap j and the suction hose d.
♦ Press the release button 3 and carefully pull the long handle 2 from the motor
unit 8 (see fig. 3).
♦ Carefully push the short handle g onto the motor unit 8 until it clicks into place
(see fig. 4).
♦ Feed the carrying strap j through the strap attachments 5/q on the rear of
the motor unit 8 and close the Velcro fasteners (see figs. 5 and 6).
♦ Press the release button w and carefully pull the floor nozzle r from the motor
unit 8 (see fig. 7).
♦ Push the suction hose adapter f into the motor unit 8 until it clicks into place
(see fig. 8).
Fig. 3
Fig. 6
■ 12 │ GB │ IE
1 .
Fig. 4
1 .
Fig. 7
Fig. 5
2.
Fig. 8
SST 40 A1