Remove The Contact Metal Bottom B; Remove The Plasma Panel Section From The Cabinet Assy; Remove The K-Board - Panasonic TC-P42S30 Service Manual

8.15. Remove the Contact metal bot-
tom B
1. Remove the Stand bracket. (See section 8.11.)
2. Remove the screws (×5

3. Remove the Contact metal bottom B.

8.16. Remove the Plasma panel sec-
tion from the Cabinet assy.
1. Place the Cabinet assy on a flat surface of a table (cov-
ered by a soft cloth) and a cushion.
2. Remove the Contact metal bottom B. (See section 8.15.)
3. Remove the screws (×6

4. Remove the Plasma panel section from the Cabinet assy.

, ×7
).
).
8.17. Remove the Contact metals
1. Remove the Cabinet assy. (See section 8.16.)
2. Remove the Tape from the Contact metals.
3. Remove the screws (×8
4. Remove the Contact metal side (L, R).
5. Remove the screws (×6
6. Remove the Contact metal top.
7. Remove the screws (×15
8. Remove the Contact metal bottom A.

8.18. Remove the K-Board

1. Remove the Contact metal bottom B. (See section 8.15.)
2. Remove the screw (×1
3. Remove the claw (×1
4. Disconnect the connector (K1) and remove the K-Board
from the LED Panel.
24
).
).
).
).
).