Advertisement
4. OPERATION
P
4.1.
Choose from one of the three nozzles provided and fit to main body, ensure that the nozzle locks into the main body securely. (fig.2)
4.2.
Ensure that the control knob is turned off (fully clockwise) before assembling.(fig.3)
4.3.
Keep the gas cartridge upright when fitting to the torch. Position the torch valve over the cartridge valve and carefully screw the cartridge
into the torch until it meets the rubber seal of the torch valve - take care to avoid cross-threading (fig.4)
WARNING! DO NOT overtighten as this can damage the cartridge valve.
‰
4.4.
Shake gas cylinder for a few moments.
4.5.
To operate the torch push slide switch down to unlock the trigger (fig.5). Turn knob (fig.3) to allow gas to be primed.
4.6.
Depress the trigger in order to operate ignition and allow gas to flow.
4.7.
Adjust the flame by turning the control knob (fig.3) either clockwise (-) or anti-clockwise (+). Recommended inner flame length is 10 -
20mm.
4.8.
To extinguish the torch, turn the control knob fully clockwise.
4.9.
Once the torch has cooled, unscrew the cartridge for storage.
NOTE:
In cold conditions it is advisable to pre-warm the cartridge to room temperature before operation.
HEAT GENTLY - DO NOT heat to temperatures above 40°C (104°F).
5. TROUBLESHOOTING
5.1.
If the torch is moved rapidly, tilted too far to the side or upside down, the flame may flare or extinguish. To prevent this, adjust the inner
flame to 6.5mm and let the torch warm up for 3 minutes prior to such movement. Slowly lengthen flame as necessary, once the torch
is in the desired position.
fig.2
Fig.2
Fig.4
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.3
fig.4
01284 703534
Original Language Version
fig.5
sales@sealey.co.uk
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
AK2958 Issue:1 04/10/22
Advertisement
