Pentax Optio S4 Connection Manual page 8

5
Click [Next] and then click [Finish].
Reboot your computer after the screen closes.
6
Turn your camera off and plug the USB cable into your
camera and into an available USB port on your
computer.
7
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO S4] (Windows XP) or [Search
for the best driver for your device (Recommended)] (Windows 98 /
98SE / Me / 2000) in the task bar recognized area to begin the
installation.
8
Double click [My Computer] on the desktop.
When the installation is completed, your camera can then be found
in the [My Computer] window as [Removable Disk].
Make sure that "Removable Disk" is displayed in the [My computer]
window.
In the case of Windows XP, if the SD Memory Card /
MultiMediaCard has a volume label attached, the content of the
volume label will be displayed instead of [Removable Disk]. If the SD
Memory Card / MultiMediaCard is new and has not been formatted,
the manufacturer and capacity of the card may be displayed.
6