Disconnecting The Camera From Your Pc - Pentax Optio S4 Connection Manual

Disconnecting the Camera from your PC

Windows 2000 / Me
1
Double-click the [Unplug or
eject hardware] icon in the task
bar recognized area.
The [Remove Hardware] screen will
appear.
2
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop Hardware Device] screen
will appear.
3
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message will appear.
4
Click [OK].
5
Turn off the camera and
disconnect the USB cable from
your camera and PC.
The computer is downloading the camera's image data with the
camera is connected to the computer and the camera flash status
lamp (red) is flashing. Image data may be damaged if you disconnect
the camera during such conditions.
In the event that an error message is displayed in Step 4, confirm that
the flash status lamp has turned off and then disconnect the camera.
12