Advertisement
SECTION 1:
ASSEMBLY
SETUP: Base Assembly
1a. Remove all components from the packing box. Identify
1 x short bottom panel (part 2) and affix the 1 x corner post
(part 5) using 2x M5 x 12 screws (part 7).
NOTE: The bottom panels are fixed to the lower holes on
the corner posts with the slots facing downwards
Slots facing downwards
1b. Identify 1 x long bottom panel (part 1) and affix to the
opposing side of the corner post using 2x M5 x 12 screws
(part 7).
Slots facing downwards
En-3
OUTLAND LIVING
- RAISED GARDEN BED - OWNER & SAFETY MANUAL
®
Owner & Safety Manual
1c. Affix 1 x corner post (part 5) to the opposing end of the
long bottom panel using 2 x M5 x 12 screws (part 7)
Slots facing downwards
1d. Repeat these steps to attach all bottom panels.
D.332.000.V0
Advertisement
