Pentax Optio E10 User Manual page 85

Symptom Possible causes
Flash does not fire. * Flash off is selected in flash mode.
* 10+2 sec. Self-timer is selected in
* The [Drive Mode] is set to [High Speed
* The camera is in the
Continuous shooting is * The capacity of the built-in memory or
not possible.
Cannot transfer files * USB cable is not connected securely.
over a USB * USB driver is not installed.
connection. * Camera is turned off.
self-timer mode.
Continuous] or [Auto Bracket].
(movie) mode.
SD memory card is full.
Solutions / Corrective Actions
* Select a different flash mode.
* Select [Standard] in the [Drive Mode].
* Switch the mode dial to another
mode.
* Insert SD memory card with available
space or delete unwanted images.
* Check all connections.
* Install the USB driver on your
computer.
* Turn on the camera.
EN-85