Pentax Optio E10 User Manual page 57

4. After Print Setting is set, the print icon
image. You can still use the four-way controller (
image by your preference, then press the
5. Use the four-way controller (
setting, then press the
[Paper Size]: You may select the desired item depending on the type of
printer being used.
[Border status]: You may select the desired item depending on the type
of printer being used.
6. This starts printing and displays the message "Printing now" on the
LCD monitor screen.The message will disappear after the printing is
finished. Then the screen returns to [Select Printing Mode].
To cancel printing:
Pressing the button during print data transfer displays the screen
for selecting whether to [Continue] or [Cancel] printing.
is marked on the displayed
button to print.
) to access the paper selection
button to confirm.
) to change the
OK
EN-57